Recommended modem firmware version 11.617.24.00.00 To reduce LTE interface IP subnet mask to /32 configure modem with at-chat command: /interface lte at-chat input="AT^CUSTFEATURE=3,1" V7 - by default will try to use modem in MBIM mode No serial support, but works with IP on LTE interface There are different versions of this modem E3531-6 works from version 6.40RC25 as ppp, mbim supported only from RouterOS V7 Models with suffixes -320 and -608 will not work with RouterOS v6, please use v7 instead. Works! ppp interface, vendorid=0x12d1 deviceid=0x140cĬonfig-less LTE interface for modems with vendor-id="0x12d1" device-id="0x14db" Revision: T77W968.F1.0.0.5.2.VZ.013 044ĭata channel 0, Info channel 0, init: AT+CFUN=1 (needs manualy change profile by command AT*ENAP=1,1) Multiple modem versions with same marketing name exist, only H/W ver: A1 supported as config-less LTE interface Works! Data Channel: 2, Info Channel: 3,Modem Init: AT+CFUN=1, vendor-id="0x2001" device-id="0x7d02" Some info from modem: > H/W Ver.: B1, F/W Ver.: 2.0.1eu, revision: +CGMR: .WG.MP.V3, 9 02:08 Different HW revisions might not work with RouterOS ( aka "USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A") LTE interface, Modem can be configured only through modems configuration WEB page.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |